Loading ...
Free Shipping on orders of $49+ | Signup for Direct Rewards
Free Shipping on orders of $49+ | Free Store Pickup | Signup for Direct Rewards
Free Shipping on orders of $49+ | Signup for Direct Rewards
Free Shipping on orders of $49+ | Free Store Pickup | Signup for Direct Rewards
Limited to 4 tanks per customer. Orders containing more that 4 tanks will not be filled.
The Faber Blue Steel FX Steel Scuba Tanks are manufactured in Italy by Faber. All Blue Steel cylinders are manufactured to the highest standards in the diving industry. Each Blue Steel tank is drawn from high quality Chromium Molybdenum steel, then thoroughly cleaned using a proprietary Phosphatized process. The entire tank is triple Zinc protected, then finished with an internal epoxy coating and a durable Polyurethane external coating. Every Blue Steel scuba tank we carry is Nitrox ready. All of our Blue Steel tanks come equipped with a Faber conversion valve (200 BAR DIN/Yoke insert). Please specify if intended for Nitrox use (Nitrox band sold separately).
All tanks ordered from Divers Direct will be shipped without compressed air and the valve will be packaged separately. You will be responsible for obtaining a visual inspection of your tank prior to its use.
*100 CF Tanks – Shades of silver may vary*
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov.
5 out of 5 stars
Amazing shop, product selection, and staff!
4 out of 5 stars
I really like the extra air that this product provides in the 133 size. The only downfall is switching from the aluminum 80 to the steel 133. There’s quite a bit of weight difference which takes them getting used to when demonstrating how to perform your removal and replacement underwater or a gear exchange with students other than that it is nice being able to cut down on the amount of Lead I Dive with. Another bonus would be I can get through a majority of the Training dives with open water students on one tank versus a couple aluminum tanks.
5 out of 5 stars
It’s comfortable for teenage divers
5 out of 5 stars
Amazing. Knowledgeable staff. Great advice
5 out of 5 stars
After scouring the used tank market for steel 100s I check my local dive shop and found the tanks were 125$ higher than Divers Direct. It was worth the drive for a pair of tanks- the service and professional demeanor of the staff was top notch
Commented 01/14/2026
No, however we can assist you with a special order to purchase a specific valve separately.
Commented 07/29/2025
Yes, the Faber scuba tanks are galvanized, and then coated with paint.
Commented 06/11/2025
This is a high pressure cylinder. Divers Direct does not sell any low pressure cylinders.
Commented 06/05/2025
No, The Faber Blue Steel 133 tank has a diameter of 8.00 inches. The Faber Blue Steel 80 cu ft tank has a diameter of 7.24 inches.
Commented 03/18/2025
If you find a product at another authorized dealer, online or in-store, we will match that price, then take another 10% off the difference. Offer is good even after your purchase! If you find a product priced lower elsewhere within 30 days from purchase, we will refund you the difference plus 10%. Terms Competing dealer must have the item or items in stock and available for immediate purchase or delivery The item must be the same: New (not used), Brand, Model, Features, and Color must match Competing store, web site, or seller must be an authorized retailer based in the United States. Top quality brands do not authorize their dealers to sell across country lines, so prices from offshore dealers are not considered authorized Applies to the total delivered price of the item including shipping and promotions Cannot be combined with any other offer
Commented 10/31/2024
Shipping cost varies depending on destination and carrier. The Steel 80 comes with the Pro valve.
Commented 10/28/2024
The height is 20.8 inches, diameter 7.25 inches. All of our Blue Steel tanks come equipped with a Faber conversion valve (200 BAR DIN/Yoke insert).
Commented 10/01/2024
We currently can not make tanks available for pick up. We can ship tanks though. More on our shipping policy can be found here: https://www.diversdirect.com/m/shipping-policy
Commented 08/19/2024
All of our Blue Steel tanks come equipped with a Faber conversion valve (200 BAR DIN/Yoke insert) The 80cf tanks come with a hard plastic boot, the 100cf tanks come with a rubberized boot.
Commented 04/22/2024
Empty Weight: 34.0 lbs / 15.6 kg Outside Diameter: 7.25” / 184 mm Length: 25.3” / 64.5 cm
Commented 01/30/2024
The outside diameter is 7.25 inches
Commented 12/10/2023
The max fill pressure for a Faber Blue Steel 100 is 3,442 psi
Commented 10/27/2023
Please reach out to our customer service department at experts@diversdirect.com for further assistance.
Commented 10/16/2023
Left and Right-handed valves are not items that we sell, and would need to be purchased elsewhere.
Commented 10/10/2023
This is a high pressure cylinder. We do not sell any low pressure cylinders.
Commented 07/01/2023
From what I can find, it looks like the FX Faber tank and an XS Faber are the same tank. However, I was unable to find anything referring to a SX Faber tank.
Commented 06/08/2023
A single or double tank setup is mostly going to depend on the type of diving you will be doing. Doubles are used for cavern or technical diving, while singles are typically used for every other type of diving.
Commented 05/22/2023
We would be happy to assist you further with this. Please reach out to us at experts@diversdirect.com
Commented 05/22/2023
Weight: From 6.6 lbs. to 46.9 lbs. (3 kg to 21.27 kg) Diameter: From: 3.94" to 8.02" (10 m to 20.37cm) Height: From: 19.5" to 29.53" (49.5cm to 75cm)
Commented 03/05/2023
All of our Blue Steel tanks come equipped with a Faber Convertible Blue Steel Valve.
Commented 02/21/2023
Yes, the cylinder comes with a boot as shown in the photo.
Commented 02/12/2023
The 133CF Faber Blue Steel FX Steel Scuba Tanks weigh 45 pounds. They can hold 3442 PSI (roughly 237 Bar). In liters, this cylinder holds 17.
Commented 01/13/2023
For store pick up, we can get the tanks ready and filled before you arrive. When you do arrive you will need to show your Nitrox Certification card in order to pick the tanks up.
Commented 12/21/2022
A 10 liter cylinder is the equivalent of an 80cf. For steel these are currently prices at $289.99 each.
Commented 12/16/2022
We cannot see which size you are referencing. Feel free to email our customer service team at experts@diversdirect.com and they can provide you with the requested information. Please include the size of the cylinder you are inquiring about.
Commented 09/22/2022
The CF in the 80, 100, and 133 are all different. The valves are all the same, they are the Faber Convertible Blue Steel Valve rated to 5250 PSI
Limited to 4 tanks per customer. Orders containing more that 4 tanks will not be filled.
The Faber Blue Steel FX Steel Scuba Tanks are manufactured in Italy by Faber. All Blue Steel cylinders are manufactured to the highest standards in the diving industry. Each Blue Steel tank is drawn from high quality Chromium Molybdenum steel, then thoroughly cleaned using a proprietary Phosphatized process. The entire tank is triple Zinc protected, then finished with an internal epoxy coating and a durable Polyurethane external coating. Every Blue Steel scuba tank we carry is Nitrox ready. All of our Blue Steel tanks come equipped with a Faber conversion valve (200 BAR DIN/Yoke insert). Please specify if intended for Nitrox use (Nitrox band sold separately).
All tanks ordered from Divers Direct will be shipped without compressed air and the valve will be packaged separately. You will be responsible for obtaining a visual inspection of your tank prior to its use.
*100 CF Tanks – Shades of silver may vary*
